The AutoPilot Authority

  Safety First WARNING: It is EXTREMELY important that the power is completely turned OFF at the circuit breaker to the AutoPilot Pool Pilot controller BEFORE attempting to remove the cover. Working with live electrical components can be fatal. Step-by-Step Video Guide In this video, we demonstrate the proper technique for removing the cover from an AutoPilot Pool Pilot Digital or Soft Touch controller without damaging the internal ribbon cables or the plastic housing. Quick Summary of Steps Turn the Power Off: Ensure the breaker is off. Locate the Screws: There are 4 black thumb screws (2 on the left and 2 on the right) located on the sides of the cover. Loosen, Don't Remove: You generally only need to loosen these screws to release the faceplate. Careful with the Cables: Once the cover is loose, tilt it forward slowly. The display board is attached to the main power board via a delicate cable harness. There is also a connection for the fans. Do not pull the cover away quickly.